Home > Products > Slant-bed CNC Lathe > Twin Spindle Power Turret CNC Lathe

Products

New Products

Twin Spindle Power Turret CNC Lathe

Jingfusi is a professional Twin Spindle Power Turret CNC Lathe manufacturer. It has good processing performance and machine tool service life. The side chip removal and back chip removal are integrated into one design, which allows workers to install it in any way.

Model:CK46/52-46DTY

Send Inquiry

Product Description

As a manufacturer, Jingfusi provides high-quality Twin Spindle Power Turret CNC Lathe for customers. The features of our product are as follows:
·Underthe same conditions of configuration,casting structure,casting aging,assembly acuracy,etc:virtualY-axis has stronger rigiditythan verticalY-axis;
·The roundness of virtualY-axis is easier to adjust than that of verticalY-axis;
·The stroke of verticalY is easier to extend than that of virtualY-axis;
·The machined surface effect of verticalY-axis is better than that of virtual Y-axis;
·Programming of verticalY-axis is easier than that of virtualY-axis.
·The 0°power head can normally operate at 8000 rpm,and the 90°power head can normally operate at 6500 rpm.
·The turret has no gear module transmission,eliminating the heat source and ensuring machining accuracy.
·The milling and turning function can machine complex materials such as stainless steel,titanium alloys,and carbon steel.
·Chip removal method:Side chip removal and rear chip removal are integrated and can be installed arbitrarily.
·The integral casting undergoes annealing,vibration time,and other aging processes to ensure long-term stable machining and machine to lifespan.

Main Specification

Model of lathe		unit	CK46-46DTvitualY-axis	CK52-46DT vitualY-axis	Remart
Machining capacity	Max.swing diameter over bed	mm	0700	0700	Disk
	Maximum turning diameter	mm	0300	0300
	Max.turning length	mm	480	480
MainSpindle	Spindle hydraulic chuck	inches	6”	8”
	Spindle center height from ground	mm	1050	1050
	Spindle nose	-	A2-5	A2-6
	Spindle bore diameter	mm	Ø56	Q66
	Maximum bar material diameter	mm	Ø45	051
	Maximum spindle speed	r/min	4500	4000
	Spindle motor power/torque	Kw/N.m	11KW/72 N.m	11KW/143N.m
counter-spindle(electical motor spindle)	counter-spindle hydraulic chuck	inches	6”	6”
	counter-spindle nose	-	A2-5	A2-5
	counter-spindle maximum set speed	r/min	4000	4000
	Spindle motor power/torque	Kw/N.m	11Kw /75Nm	11 /75
Powerturet (high speed drect diwing model)	Power turret model	T	BMT55-16T	BMT55-16T	JFS Built-in Direct Drive Turret
	Turret power motor power/torque	Kw/N.m	7.5/22 or 11kw/4.2km
	Turret power motor maximum speed	r/min	8000 or 6000
X/Z/Yaxis feeding	Maximum fast travel speed	m/min	24	24
	XZ1Y-axis motor power/torque	Kw/N.m	3.1/15	3.1/15
	Z2-axis motor power/torque	Kw/N.m	2.4/11.5	2.4/11.5
	XZ1/Z2/Y-axis C3-grade ball crews	-	32/40/32/40	32/40/32/40
	×/Z1/Z2/y-axis roller guide rails	-	35/45/45/45	35/45/45/45
	X-axis maximum travel	mm	500	500
	Z1-axis maximum travel	mm	530	530
	Z2-axis maximum travel	mm	500	500
	Virtual Y-axis effective travel	mm	+48,-52	+48,-52
	Virtual Y-axis 90°driving head offset spindle center	mm	-37	-37
Equipment specifications	Machine net weight	kg	5500	5600
	Total machine power	KW	30	34
	Machine L×W×H	mm	2600x2050x2040	2600x2050×2040

The machine tool is constantly being optimized;please refer to the actual data of the machine tool for the above parameters.

Optional items

Optional items
Configuration item		CK46-46DT virtual Y-axis	CK52-46DT virtual Y-axis
Main Spindle	Mechanical spindle	●	●
Main Spindle	Electric spindle	O	O
controller	SYNTEC controller	●	●
Feed axis	Yaskawa	O	O
Feed axis	SYNTEC	●	●
Turret	Direct drive high-speed powerturet	●	●
	Taivan Mykun power turret	O	O
	Germany Brand SAUTER power turret	O	O
Clamping	Pull back clamp	●	●
Clamping	Chuck	O	O
Auxiliary equipment	Parts collect device	O	O
	Feeding device	O	O
	Chip conveyor	O	O
	Automated robot	O	O
	oil mist separator	O	O